Home > News > Content

Analysis Of The Causes Of Principal Axis Damage

The causes of Principal Axis Damage:

1. Program error accounts for 26.4%

2. Setting error of cutter length correction accounts for 7.3%

3. Work-piece coordinate system setting error accounts for 2.7%

4. Manual operation error accounts for 4.9%

5. Work-piece size error accounts for 1.1%

6. Tool setting error accounts for 0.5%

7. Inadequate maintenance accounts for 0.3%

8. Overloading accounts for 17.7%

9. ATC Handle setting error accounts for 1.3%

10. HSK guide bolt of handle is not installed accounts for 0.8%


So for above reasons, it is very important for operator to avoid the human factors in running the machine. However, how they work when cause r the damages? Let analyze it and specific situations are as follows:

1. The understanding of machine capability

2. Error in modifying NC program artificially

3. CAM program knife off tool

4. Cancel tool instruction and parameter change

5. Wrong setting of work-piece coordinate system

6. Tool length setting error

7. The program is not complete

8. Large diameter tool programming

9. Interference of tool holder, work-piece and fixture during machining

10. Counter direction of tool holder and other reasons like the cutting fluid enters the principal axis.

Our Service

We use mainstream servo of control system,touch screen,Human-Computer Interface,which combined with exquisite machinery manufacturing,maximum requirements for customers at home and abroad to solve a variety of technology....


Contact Us

Address: 890 kilometers, New 204 national road, Nanfeng Town, Zhangjiagang, Suzhou, Jiangsu, China

Tel: +86-512-58622076

Fax: +86-512-58901519

E-mail: sales-grace@heshunjx.com

CopyRight© Zhangjiagang Heshun Machinery Manufacture Co.,Ltd